MechaTron
Loss In Weight (Gravimetric) Feeders
MechaTron feeders are used extensively for the accurate addition of major, minor and micro ingredient feeds right across the chemical, food, pharmaceutical, and plastic industries.
MECHATRON Coni-Flex
Flexible Wall External Agitation
Accuracy: ± 0.5% or better
Capacities: 0.0002 to 32m3/hr
MECHATRON Coni-Steel
Internal Vertical Agitation
Accuracy: ± 0.5% or better
Capacities: 0.0003 to 103/hr
MECHATRON Coni-Steel Vibratory
Vibratory discharger
Accuracy: ± 0.5% or better
Capacities: 0.0003 to 10m3/hr
For the feeding of slightly sluggish to sluggish materials. The special geometry of the flexible feed hopper ensures safe and accurate feeding without bridging and build-ups.
The discharge unit motor assembly can be swivelled around an axle located parallel to the feed screw. When the motor is swivelled out of its operating position, discharge unit, shaft sealing and feed hopper can be accessed with utmost ease. A single operator can remove feed screw and hopper with few movements.
The control electronics including the DISOCONT measuring and control system can be mounted on the feeder itself or remotely.
For difficult-to-feed materials. The agitator passes over the entire internal hopper surface and ensures safe and accurate feeding of extremely critical materials.
The vertical agitator is split. The feed hopper can easily be removed with no need to dismount the complete agitation system. So the system leaves scope for individual planning since the precious headroom can be optimally used.
The control electronics including the DISOCONT measuring and control system can be mounted on the feeder itself or remotely.
Free flowing grits, granulates, pellets, chips and fibres.
The control electronics including the DISOCONT measuring and control system can be mounted on the feeder itself or remotely.
UK Contacts
Stock Redler Limited
Redler House
Stroud
Gloucestershire
GL5 3EY
ENGLAND
Phone: + 44 (0) 1453 763 611
Fax: + 44 (0) 1453 763 582
(approx. 1.97mb)