Stock Redler part numbers are given with each filling: the Auto Greases are available
on the online shop!
0052/1000/**
GREASE L - Multi-purpose grease
|
A high quality, multi-purpose, lithium-base with an excellent performance
under extreme pressure and having a very long working life at high speeds
and at high or low temperatures. It has good adhesive properties and is
shear resistant and water resistant. It is suitable for indoor or outdoor
use on all types of bearings.
|
Label marking:
|
Grease L
|
|
Basis:
|
Mineral oil: lithium-calcium soap.
|
|
Colour:
|
Light brown.
|
|
Consistency:
|
NLGI 2.
|
|
Temperature range:
|
-30 to +120°C / -22 to +248°F
|
|
Drop point:
|
+145°C (DIN ISO 2176)
|
|
Worked penetration:
|
265 ? 295 (IP 50)
|
|
Base oil viscosity:
|
100-130 cSt at +40°C (DIN 41562)
|
|
Water resistance:
|
Fully resistant at +90°C (DIN 51807)
|
|
Timken OK Load:
|
35 lbs minimum.
|
|
DN factor:
|
450.000
|
|
Compatibility:
|
Miscible with other lithium, calcium or Lithium/calcium base greases.
|
|
0052/1001/**
GREASE F - For use with foodstuffs and pharmaceuticals.
|
A white, food-safe grease that is specially formulated for use as a general
machinery Lubricant and tap seal where incidental contact with food, drinks
or pharmaceutical is possible. Highly resistant to water washout. Corrosion
inhibiting. NSF Registration No. 125303 with H1 Approval
(this supercedes the former USDA Approval system)
|
Label marking:
|
Grease F
|
|
Basis:
|
Polyalphaolefin oil: aluminium complex thicker: PTFE solid lubricant.
|
|
Colour:
|
White
|
|
Consistency:
|
NLGI 1.
|
|
Temperature range:
|
-50 to +165°C / -58 to +329°F
|
|
Drop point:
|
<230°C (IP 132)
|
|
Water Washout:
|
<2.5 % max at +38°C (ASTM D1264)
|
|
Shell 4 ball weld load:
|
400 kg (IP 239)
|
|
DN factor:
|
400.000
|
|
Dynamic corrosion resistance:
|
0:0 (EMCOR) (IP 220)
|
|
Copper corrosion:
|
Negative (IP 112)
|
|
Compatibility:
|
Mixing it with other greases not recommended
|
|
0052/1002/**
GREASE FHT - For use at high temperatures with foodstuff and pharmaceuticals.
|
A white, food-safe grease that is specially formulated for use as a general
machinery lubricant and tap seal at high temperatures where incidental
contact with food, drinks or pharmaceutical is possible. Highly resistant
to water washout. Corrosion inhibiting. NSF Registration No. 125302
with H1 Approval (this supercedes the former USDA Approval
system).
|
Label marking:
|
Grease FHT
|
|
Basis:
|
High viscosity silicone oil: silica thicker : PTFE solid lubricant.
|
|
Colour:
|
White, semi-translucent
|
|
Consistency:
|
NLGI 2.
|
|
Temperature range:
|
-20 to +220°C / -4 to +428°F
|
|
Drop point:
|
none (IP 132)
|
|
Water Washout:
|
<2 % max at +38°C (ASTM D1264)
|
|
Shell 4 ball weld load:
|
180 kg (IP 239)
|
|
Mean Hertz load:
|
30 kg (IP 239)
|
|
DN factor:
|
200,000
|
|
Dynamic corrosion resistance:
|
0:0 (EMCOR) (IP 220)
|
|
Copper corrosion:
|
Negative (IP 112)
|
|
Compatibility:
|
Mixing with other greases not recommended
|
|
0052/1003/**
Grease G - Open gear grease
|
A soft, smooth and extremely adhesive grease for lubrication of open
gears. It has excellent water displacing properties and is particularly
suitable for gears operating in wet or humid conditions.
|
Label marking:
|
Grease G
|
|
Basis:
|
Solvent refined mineral oil: aluminium soap.
|
|
Colour:
|
Black
|
|
Consistency:
|
NLGI 0/1.
|
|
Temperature range:
|
-30 to +70°C / -22 to +158°F
|
|
Worked penetration:
|
320 ? 350 (IP 50)
|
|
Water spray resistance:
|
<0.5% loss (ASTM D404)
|
|
Compatibility:
|
Mixing with other greases not recommended.
|
|
0052/1004/**
Grease H - For very high temperatures.
|
A specially formulated grease fo
r maximum lubrication at very high temperatures.
|
Label marking:
|
Grease H
|
|
Basis:
|
Mineral oil/synthetic oil : inorganic
|
|
Colour:
|
Green-brown
|
|
Consistency:
|
NLGI 1
|
|
Temperature range:
|
-10 to 210°C / -14 to +410°F
|
|
Worked penetration:
|
310 ? 340 (IP 50)
|
|
Base oil viscosity:
|
1500 ? 2000 cSt at +40°C (DIN 41562)
|
|
Water resistance:
|
Fully resistant at +90°C (DIN 51807)
|
|
DN Factor:
|
250,000
|
|
Compatibility:
|
Mixing with other greases not recommended without prior consultation.
|
|
0052/1005/**
Grease M - For extreme pressure conditions
|
A high quality, multi-purpose grease with similar properties to GREASE
L but fortified with micro fine molybdenum disulphide for maximum performance
under extreme pressure.
|
Label marking:
|
Grease M
|
|
Basis:
|
Mineral oil : lithium-calcium soap : 2% MoS2
|
|
Colour:
|
Grey-black
|
|
Consistency:
|
NLGI 2
|
|
Temperature range:
|
-30 to 120°C / -22 to 248°F
|
|
Drop point:
|
+145°C (ISO 2176)
|
|
Worked penetration:
|
265-295 (IP 50)
|
|
Base oil viscosity:
|
100-130 cSt at +40°C (DIN 41562)
|
|
Water resistance:
|
Fully resistant at +90°C (DIN 51807)
|
|
Timken OK Load:
|
45lbs minimum
|
|
DN factor:
|
450,000
|
|
Compatibility:
|
Miscible with other lithium, calcium or lithium-calcium base greases
|
|
0052/1006/**
Grease C - For chaindrives and slideways operating in arduous conditions
in which Oil SC would be unsuitable
|
A semi-fluid grease incorporating extreme pressure additives and anti-oxidants
to provide effective lubrication with good corrosion resistance. It provides
a water repellent protective film.
|
Label marking:
|
Grease C
|
|
Basis:
|
Mineral hydrocarbons : lithium soap : 2 % MoS2
|
|
Colour:
|
Dark green
|
|
Consistency:
|
NLGI 00/000
|
|
Temperature:
|
-10 to 100°C / +14 to +212°F
|
|
Worked penetration:
|
420-450 (IP 50)
|
|
Base oil viscosity:
|
900 cSt at +40°C (DIN 41562)
|
|
Compatibility:
|
Mixing with other greases not recommended
|
|
0052/1007/**
Grease W - Waterproof grease
|
A high performance, strongly adhesive, extremely waterproof grease, containing
extreme pressure and anti-wear additives, corrosion inhibitors and anti-oxidants.
Specially developed for use in water and sewage treatment plants, marine
and off-shore applications and other hostile water environments.
|
Label marking:
|
Grease W
|
|
Basis:
|
Blend of highly refined mineral hydrocarbons & synthetic :
lithium soap
|
|
Colour:
|
Pale green
|
|
Consistency:
|
NLGI 2
|
|
Temperature range:
|
-20 to +130°C / -4 to +266°F
|
|
Drop point:
|
+180°C (ISO 2176)
|
|
Worked penetration:
|
265-295 (IP 50)
|
|
Base oil viscosity:
|
1000 cSt at +40°C (DIN 41562)
|
|
Water resistance:
|
Fully resistant at +90°C (DIN 51807)
|
|
Water washout test:
|
1% max
|
|
Rust test:
|
No.1 rating
|
|
Timken OK Load:
|
55 lbs
|
|
Speed rating:
|
2500 rpm max
|
|
DN factor:
|
250,000
|
|
Compatibility:
|
Miscible with other lithium base greases
|
|
0052/1008/**
Grease Long Life 2 - For extended lubrication intervals
|
A soft, premium quality grease designed to provide extended re-lubrication
intervals in a wide range of arduous and non-arduous working conditions.
Suitable for use in all types of bearings and sliding surfaces.
|
Label marking:
|
Mineral oil : lithium-calcium multi complex soap
|
|
Colour:
|
Red
|
|
Consistency:
|
NLGI 2
|
|
Temperature range:
|
-30 to +150°C / -22 to 302°F
|
|
Dropping point:
|
>230°C (ASTM D2265)
|
|
Shell 4 ball weld load:
|
>800 kg (IP 239)
|
|
Mean Hertz load:
|
125 Kg
|
|
Timken OK Load:
|
25 kg (IP 236)
|
|
DN factor:
|
400,000
|
|
Compatibility:
|
Miscible with other lithium, calcium or lithium/calcium base greases
|
|
0052/1009/**
Grease CR - Chemical-resistant grease
|
A specially formulated grease that is designed to provide long-term lubrication
in chemically aggressive atmospheres. It is suitable for all plain and
anti-friction bearings as well as sliding surfaces. It is resistant to
a wide range of chemicals, oils and gases.
|
Label marking:
|
Grease CR
|
|
Basis:
|
High viscosity silicone oil : silica thickener : PTFE solid lubricant
|
|
Colour:
|
White, semi-translucent
|
|
Consistency:
|
NLGI 2
|
|
Temperature range:
|
-20 to +180°C / -4 to +347°F
|
|
Drop point:
|
none (IP 132)
|
|
Water washout:
|
<2 & max at +38°C (ASTM D1264)
|
|
Shell 4 ball weld load:
|
180 kg (IP 239)
|
|
Mean Hertz load:
|
30 kg (IP 239)
|
|
DN factor:
|
400,000
|
|
Chemically resistant to:
|
hot & cold water, refinery gases, Frigen 114, natural gas,
sulphur dioxide, 90% glycol, conc. Sulphuric acid (up to 45°C),
liquid ammonia, 40% nitric acid, 4% caustic soda.
|
|
Compatibility:
|
Mixing with other greases not recommended
|
|
Auto Greases can be filled with almost any type of lubricant. However many
widely used greases are prone to oil-soap separation when subjected to sustained
light pressure in an Auto Grease. This can lead to a serious curtailment of
the Auto Greases working life. It is therefore essential to use only greases
or gels that have been tested and approved for use in Auto Greases (such as
the standard grease fillings above) if the discharge rates and working lives
quoted in the Auto Grease Technical information sheet are to be realised in
practice.