Stock Redler Tidal Control Units detect the level of material in a hopper
or bunker. They can be used in high-level or low-level situations
to regulate the amount of material in the hopper. Another use is
for monitoring the discharge chute from a process. When the chute
becomes blocked, the Tidal instructs the control system to shut
down the feed to the chute.
» read more
The Stock Redler RoCon Control Unit monitors the rotation of the tension end
shaft and detects when the shaft slows or stops rotating. If the chain
breaks during operation, the RoCon signals the control system to stop
the machine, preventing the chain from piling up inside and causing damage.
» read more
Stock Redler Limited supply a wide range of slide gates to control material flow inside
a machine. Manual and electropneumatic versions are available in three
different duty levels and can be made to any dimensions.
» read more
Stock Redler Bulk Throwers are designed to throw granular material on to a
pile or to spread it over floors. Material poured onto the feed chute
of the thrower is automatically transferred to a high-speed belt which
discharges it in a steady stream, fully controlled by the operator.
» read more
The new addition to the Stock Redler range of standard products is an
extension of the ordinary Bulk Thrower. These units are specially
adapted to fit onto ISO 20' and 40' containers for easy transfer
of material onto trucks.
» read more
Stock Redler Circular Bin Dischargers (CBD) are well proven and
established discharge aids for hoppers and silos. An
arch breaker arm rotates around the bottom, breaking any bridge
of material which may have formed. These units come in single,
two or three stage versions to suit the material and capacity
required.
» read more
Stock Redler's Auto Probe Level Indicators detect the presence or absense
of material in a container by sensing the electrical properties
of the material and comparing against air. This sophisticated sensor
comes complete with automatic calibration in a single button press.
» read more
The Paddle Level Indicator is designed to signal the presence
or absence of bulk materials such as chemicals, chips, granules
and powders. It is ideal for bunkers, hoppers and silos as
well as for blockage detectors in conveyor chutes. The detection
method is simple: the paddle rotates in air and becomes blocked
when material is present.
» read more