Detects and Protects
The Paddle Level Indicator is designed to signal the presence, or absence, of bulk materials such as chemicals, chips, granules and powders. It is ideal for bunkers, hoppers and silos as well as for blockage detectors in conveyor chutes. A rotating paddle achieves the detection of the material.
If material impedes the rotation of the paddle, the control signal changes and the motor circuit switches off. In this state all moving parts are stationary.
Please state:
| Supply: | 110 VAC or 220 VAC 50/60 Hz. 12, 24 or 48 VDC |
| Supply Tolerance: | + or – 10% |
| Temperature: | -35°C to + 85°C |
| Output: | Two single pole, double throw switches rated at 12 amps/250 volts. |
| Conduit Entry: | Two conduit entries ½ “NPT or PG11. |
| Connections: | Terminal block. |
| Enclosure: | Flame retardant glassfibre reinforced nylon. |
| Protection: | IP 65. |
| High/Low interlock: | Facility to link two probes for high/low level sequenced interlock. |
| Paddle Selection: |
TYPE RLI P1 Bulk weights over 1120 kg/cu mtr (70 lbs/cu ft). |

TYPE RLI P1
Single Vane Paddle
For general use on side mounted units. Particularly suitable for poor flowing or high density materials. Bulk weights over 1120 kg/m³ (70lbs/cu. Ft). Insertable through 1 ¼” half pipe coupling.
TYPE RL1 P2
Single Vane Paddle, “Scimitar”
For maximum sensitivity on top or side mounted units. Bulk weights from 480 to 1120 kg/m³ (30 to 70 lbs/cu. Ft). Insertable through a 1 ¼” half pipe coupling
TYPE RL1 P3
Three Vane Paddle Small
For use on top or side mounted units. Bulk weights from 480 to 1120 kg/m³ (30 to 70 lbs/cu. Ft)
TYPE RL1 P4
Three Vane Paddle Large
For maximum sensitivity on top or side mounted units. Bulk weights up to 480 kg/m³ (30 lbs/cu. Ft).